Close
Search
Picture for category Cultivation Equipment

Cultivation Equipment

Select Subcategory

Jumbo Buster Rippers

Fieldmaster's chisel ploughs or deep rippers are invaluable for improving poor drainage, compacted soil and hard pans (under the topsoil). Ideal for soil aeration as it reaks up the top soil into big clods which allows air into the soil and helps with the drying out of puggy areas. Also speeds up the decomposing of stubble and releases nutrients better. Pan Breaking: Breaking up the lower hard pan allows roots to penetrate deeper to moisture in dry weather and improves drainage in the wet.
$0.00 incl tax

KBLD Grader Blades

The KBLD Series of Grader Blades is the next generation design for grading and scraping in New Zealand. Designed for maximum versatility with simple manual adjustments the operator can move material side to side, offset the blade to grade in hard-to-reach areas and tilt the blade to grade a camber into a slope or road to aid water runoff. The reinforced mouldboard's involuted design enables a more efficient and continuous cutting, mixing and rolling of material while the cutting edge is reversible to extend its lifespan.
$0.00 incl tax

UL Series Rotary Hoe

The European designed, COSMO Bully UL Series Rotary Hoes are gear driven implements for compact and sub-compact tractors up to 40hp (max.). Engineered to till soil in nurseries, vineyards, orchards and hobby farms, they are ideal for owner operators. The rotor features six (6) C shaped, heat treated blades (per flange) in a speed configuration. The speed configuration, a design where the blades are slightly staggered from flange to flange, reduces the horsepower required to produce a fine finish in a variety of soil conditions.
$0.00 incl tax

3 Tine Rippers

Three (3) Tine Rippers are engineered to fracture hard, compacted ground leaving it open and aerated. Land management is vital as hard, compacted ground is prone to standing water (puddles) that quickly evaporates in harsh climates. Equally, sloping ground has issues with water runoff. By opening up the ground you increase subsoil moisture and enable plants to grow deeper roots. The result is paddocks that take longer to dry out, keeping pastures greener for longer. In virgin ground these rippers can be used before a Rotary Hoe or Power Harrow; reducing horsepower requirements, minimising the load on the geared implement and decreasing the number of passes to prepare the soil. In secondary application, they can be used to break up the pan (compacted layer of soil geared implements create over time) increasing soil moisture and crop yields. The main frame is constructed from square tube, fully welded and reinforced. The linkage points are a double clevis slip in pin design. The three (3) height adjustable tines have a chamfered (pointed) leading edge, that leaves a cleaner rip line, without tearing up huge chunks of grass, and reduces horsepower requirements.
$0.00 incl tax

UM Series Rotary Hoe

The European designed COSMO Bully UM Series Rotary Hoes are a single speed, side gear driven implement specifically for tractors in the 35 to 50hp range. Engineered to include multiple features and accessories traditionally found in much larger rotary hoes, the UM Series is suitable for use in nurseries, vineyards and orchards. The rotor features six (6) C shaped, heat treated blades (per flange) in a speed configuration. The speed configuration, a design where the blades are slightly staggered from flange to flange, reduces the horsepower required to produce a fine finish in a variety of soil conditions.
$0.00 incl tax

Single Tine Rippers

The Cosmo single tine rippers are strong, versatile implements that are ideal for a range of applications; disturbing rabbit warrens, breaking up and aerating compacted ground, planting tree lines and land management. They are extremely effective on sloping ground where water runoff is an issue. By carefully ripping along the contours of the land you can catch rain water, increasing subsoil moisture for greener pastures long into the drier months. The tine has a chamfered (pointed) leading edge, that leaves a cleaner rip line, without tearing up huge chunks of grass, and reduces horsepower requirements. The tine is fully welded and reinforced with double clevis slip in pin linkage points, making them one of the strongest rippers on the market.
$0.00 incl tax

UH Series Rotary Hoe

The European designed COSMO Bully UH Series Rotary Hoes are single speed, gear driven implements specifically for tractors 50 to 75hp. Engineered to include many features and accessories traditionally found in much larger rotary hoes, the COSMO Bully UH Series is suitable for a range of horticultural and gardening applications including nurseries, vineyards and orchards. The rotor, with a diameter of 480mm blade to blade, features six (6) C shaped, heat treated blades (per flange) in a speed configuration. This design, where the blades are slightly staggered from flange to flange, reduces the tractor horsepower required to till a high volume of soil in a wide range of soil types and conditions.
$0.00 incl tax

VH Series Rotary Hoe

The European designed COSMO Bully VH Series Rotary Hoes have a multi speed gearbox that is rated 50 to 90hp. The main frame is a robust and rigid construction with box section reinforcing and the side gears are sealed via a gasket creating an oil bath. The COSMO Bully VH Series produces a super fine finish. The spring loaded tailgate keeps soil inside and in contact with the blades until it is well pulverised. The multi speed gearbox allows the operator to customise the rotor speed. The rotor design, Ø 521mm from blade to blade, allows a large amount of soil to be worked without clogging up the chamber. The speed blade configuration, a design where six (6) L shaped blades (per flange) are slightly staggered, reduces the tractor horsepower required. The COSMO Bully VH Series can operate all day, every day, in demanding soil conditions and is suitable for a range of commercial horticultural and gardening applications including nurseries, vineyards and orchards.
$0.00 incl tax

Springtine Cultivator

The Springtime Cultivator is a very versatile tool! It's ideal for fast and efficient land leveling, seed preparation, stubble cleaning and weed control. The unique design allows you to do high-speed passes at an optimum working depth of 12cm.
$0.00 incl tax

UHH Series Rotary Hoe / **Indent Only**

The European designed COSMO Bully UHH Series Rotary Hoes are ideal for large scale domestic and commercial operations and working virgin ground. The multi speed gearbox (rated up to 140hp) is fixed to a robust and rigid main frame, constructed with box section reinforcing, so the implement can operate for prolonged periods of time in a range of soil types and conditions. The COSMO Bully UHH Series produces a super fine finish. The spring loaded tailgate keeps soil inside and in contact with the blades until it is well pulverised. The multi speed gearbox allows the operator to customise the rotor speed. The rotor design, Ø 530mm from blade to blade, allows a large amount of soil to be worked without clogging up the chamber. And the speed blade configuration, a design where six (6) L shaped blades (per flange) are slightly staggered, reduces the tractor horsepower required. The COSMO Bully UHH Series is suitable for a range of domestic and commercial horticultural and gardening applications including nurseries, vineyards and orchards.
$0.00 incl tax

MF Disc Ploughs

Fieldmaster's Massey Ferguson disc ploughs are easy on horse power and great for the soil because they make a finer cut and give better aeration than a conventional plough. This is the original well-proven Massey Fergusson designed disc plough, suited to a wide range of soil types including peat and sandy country. It's ideal for ploughing crop residue and stubble back in after harvesting.
$0.00 incl tax