Fencer
Fieldmaster’s Fencer series of post drivers are New Zealand’s most popular post driver for beef and dairy farmers. An 8:1 rope-pulley configuration means the hammer falls faster allowing you to power through the job. The Tri-beam mast is 110% stronger than a standard UB section beam meaning you get longer life out of your farm equipment. Fitted with a 230kg hammer weight, top link, side tilt and main lift ram as standard. We also offer a huge range of options to fit rockspikes, augers, folding masts and hydraulic side shifts. The minimum required hydraulic oil flow for this machine is 18ltrs per minute.
| Feature | Fencer |
|---|
| Standard Mast Length |
4m |
| Weight (inc Hammer) |
505kg |
| Standard Hammer Weight |
230kg |
| Side Tilt Operation |
Hydraulic |
| Top Link Operation |
Hydraulic |
| Linkage Mounting |
Cat 1&2 |
| Height Under Hammer (4m mast) |
3700mm |
| Height Under Hammer (4.5m mast) |
4200mm |
| Min Recommended PSI (Max) |
1800PSI (3000PSI) |
| Min Hydraulic Flow (Max) |
18L/Min (60L/Min) |
| Side Tilt Sngle (L to R) |
20/20 |
| Top Link Angle (Fwd/Back) |
20/28 |
*Due to continuous manufacturing improvements specifications may vary
- 280Kg Hammer weight
- 4.5m folding mast
- Hydraulic side nudge ram
- Hydraulic rockspike kit
- Hydraulic auger kit
- Closed circuit hydraulic valve system
Instructional Set Up Video -
Description
Features:
- 230kg (506lb) hammer
- 4.0m H.D. TRI-BEAM mast
- 4-bank valve hydraulic side angle
- Hydraulic top link
- 18 ltrs per min required at 1800 PSI
- New Zealand Made
Customers who bought this item also bought
The Sabre range is available in two models: the 1200 and the 1500. They are ideal for small block and lifestyle properties. Like all Fieldmaster products, the Sabre range is built tough with quality components for years of service.
Sabre slashers can easily be upspecced with enhanced features for cleaner finishing for the more discerning operator. Suitable for tractors to 18-40hp, the Sabre Range represents an economical, tough solution for cutting grass or topping overgrowth around the property.
The European designed COSMO SFM-M Series Mulcher is specifically designed for tractors 30 to 70hp.
The rear of the deck has a series of height-adjustable mulching rakes that hold large pruning's (up to Ø 50mm) in the cutting chamber for maximum mulching. This results in a high-quality cut in vineyards, orchards and pastures. The fixed, bolt-on tower has three mounting positions, 150mm apart, to enable the operator to offset the mulcher
