Close
Search

NZ's widest range of specialised vineyard/orchard mowers.

3 Tine Rippers

Three (3) Tine Rippers are engineered to fracture hard, compacted ground leaving it open and aerated. Land management is vital as hard, compacted ground is prone to standing water (puddles) that quickly evaporates in harsh climates. Equally, sloping ground has issues with water runoff. By opening up the ground you increase subsoil moisture and enable plants to grow deeper roots. The result is paddocks that take longer to dry out, keeping pastures greener for longer. In virgin ground these rippers can be used before a Rotary Hoe or Power Harrow; reducing horsepower requirements, minimising the load on the geared implement and decreasing the number of passes to prepare the soil. In secondary application, they can be used to break up the pan (compacted layer of soil geared implements create over time) increasing soil moisture and crop yields. The main frame is constructed from square tube, fully welded and reinforced. The linkage points are a double clevis slip in pin design. The three (3) height adjustable tines have a chamfered (pointed) leading edge, that leaves a cleaner rip line, without tearing up huge chunks of grass, and reduces horsepower requirements.
$0.00

Fencer

Fieldmaster’s Fencer series of post drivers are New Zealand’s most popular post driver for beef and dairy farmers. An 8:1 rope-pulley configuration means the hammer falls faster allowing you to power through the job. The Tri-beam mast is 110% stronger than a standard UB section beam meaning you get longer life out of your farm equipment. Fitted with a 230kg hammer weight, top link, side tilt and main lift ram as standard. We also offer a huge range of options to fit rockspikes, augers, folding masts and hydraulic side shifts. The minimum required hydraulic oil flow for this machine is 16ltrs per minute.
$0.00

FLS Series Mulcher

The Cosmo FLS Series mulchers are a light duty flail mower designed for compact and sub-compact tractors rated 15-35hp. A free wheel clutch has been incorporated into the gearbox. The gearbox produces a high rotor speed results in a finer finish on large areas of lawns, parklands or lifestyle block.
$0.00

GML Series - 2-in-1 Mulcher / Mower (2 Rotor Models)

The Fieldmaster range of GML mowers is available in 9 widths and offers a huge range of modular options which ensures you receive a machine suitable for your specific vineyard or orchard conditions. Supplied standard as a mulching mower with front and rear rollers with our specially designed ‘triple-stack’ blades which provide a finely chopped mulch material. Synchronised blade overlap also allows for excellent turning circles and manoeuvrability in restricted areas and headlands. Suitable for tractors 30-100HP
$0.00

GMR Series -3 Rotor Models - Rear Discharge Orchard/Vineyard Mower

The Fieldmaster range of GMR mowers is available in 3 different widths. A huge range of modular options are available which ensures you receive a machine suitable for your specific vineyard or orchard conditions. Supplied standard as a rear discharge mower with front skidlets, rear roller and with our specially designed heavy duty axe blades which provide a significant hitting force obliterating prunings and trimmings. Synchronised blade overlap also allows for excellent turning circles and manoeuvrability in restricted areas and headlands. Suitable for tractors 30-100HP
$0.00

GMS Series - 2 Rotor Models - Side Discharge Mower

The Fieldmaster range of GMS side discharge tractor mowers are available in 9 different widths. A huge range of modular options including wheels and rollers are available which ensures you receive a machine suitable for your specific vineyard or orchard conditions. Supplied standard as a side discharge mower with front stubbie rollers, rear roller and with our specially designed heavy duty axe blades which provide a significant hitting force obliterating pruning’s, trimmings and discharging the material out to the side of the mower and back under the rows. This provides an organic mulch and reduces the need for harmful sprays. Synchronised blade overlap also allows for excellent turning circles and manoeuvrability in restricted areas and headlands. Suitable for tractors 30-100HP.
$0.00

GMS Series - 3 Rotor Models - Side Discharge Mower

The Fieldmaster range of GMS side discharge tractor mowers are available in 9 different widths. A huge range of modular options including wheels and rollers are available which ensures you receive a machine suitable for your specific vineyard or orchard conditions. Supplied standard as a side discharge mower with front stubbie rollers, rear roller and with our specially designed heavy duty axe blades which provide a significant hitting force obliterating pruning’s, trimmings and discharging the material out to the side of the mower and back under the rows. This provides an organic mulch and reduces the need for harmful sprays. Synchronised blade overlap also allows for excellent turning circles and manoeuvrability in restricted areas and headlands. Suitable for tractors 30-100HP.
$0.00

MX Series Single Rotor Vineyard Mower

Fieldmaster’s range of MX series mowers are a specially designed single rotor gear driven narrow vineyard mower. Available in 4 cutting widths ranging in size from 0.9m to 1.8m wide enable the machine to fit down small vineyard rows. A heavy duty construction ensures the small machine is not comprised due to its size and is able to cope with the tough conditions. A range of options including rollers, mulching kits and side discharge skids can also be fitted to the MX series ensuring you are able to customise the machine to suit your needs. Suitable for tractors 40-100HP
$0.00

UL Series Rotary Hoe

The European designed, COSMO Bully UL Series Rotary Hoes are gear driven implements for compact and sub-compact tractors up to 40hp (max.). Engineered to till soil in nurseries, vineyards, orchards and hobby farms, they are ideal for owner operators. The rotor features six (6) C shaped, heat treated blades (per flange) in a speed configuration. The speed configuration, a design where the blades are slightly staggered from flange to flange, reduces the horsepower required to produce a fine finish in a variety of soil conditions.
$0.00

XHD Series - Extra Heavy Duty Rear Discharge Orchard/Vineyard Mower

The XHD series of vineyard and orchard mowers is built tough with a twin laminated 8mm thick deck. Able to cope with the toughest conditions any vineyard or orchard can throw at it. Capable of being fitted with a mix of a huge 220 diameter rear roller or puncture proof tires either options ensures the XHD is able to be easily adapted to suit your specific conditions. Heavy duty industrial couplings are fitted as standard in conjunction with the European driveline which ensures reliability and longevity.
$0.00

Forté

The Forte post driver series is a heavy duty piece of farm machinery designed for the New Zealand’s toughest conditions. A heavy duty offset base frame provides an extra low centre of gravity for stability and strength. A strong base also provides maximum hitting force ensuring max depth is reached easily. Oversize hydraulic cylinders ensure the mast is moved effortlessly and easily despite the substantial weight. The minimum required hydraulic oil flow for this machine is 16ltrs per minute.
$0.00

GML Series - 2-in-1 Mulcher / Mower (3 Rotor Models)

The Fieldmaster range of GML mowers is available in 9 widths and offers a huge range of modular options which ensures you receive a machine suitable for your specific vineyard or orchard conditions. Supplied standard as a mulching mower with front and rear rollers with our specially designed ‘triple-stack’ blades which provide a finely chopped mulch material. Synchronised blade overlap also allows for excellent turning circles and manoeuvrability in restricted areas and headlands. Suitable for tractors 30-100HP
$0.00

GMR Series - 2 Rotor Models - Rear Discharge Orchard/Vineyard Mower

The Fieldmaster range of GMR mowers is available in 9 different widths. A huge rnge of modular options are available which ensures you receive a machine suitable for your specific vineyard or orchard conditions. Supplied standard as a rear discharge mower with front skidlets, rear roller and with our specially designed heavy duty axe blades which provide a significant hitting force obliterating prunings and trimmings. Synchronised blade overlap also allows for excellent turning circles and manoeuvrability in restricted areas and headlands. Suitable for tractors 30-100HP
$0.00

QTV - Towed Vineyard Mower

The ATV vineyard mower has been designed and manufactured by the Fieldmaster team to handle common vineyard mid-row conditions. Developed in conjunction with Ara Wines in the Waihopai Valley in Marlborough that has an especially challenging mowing environment of long narrow rows and a rock strewn soil. Ideal for growing grapes but not so much for mowing!
$0.00

SFM-M Series Mulchers

The European designed COSMO Bully SFM-M Series Mulchers have a fixed, bolt on tower with three (3) mounting positions. The rear of the deck has a series of height adjustable mulching rakes that hold large prunings (up to Ø 50mm) in the cutting chamber for maximum mulching. This results in a high quality cut finish in vineyards, orchards and pastures. The COSMO Bully SFM-M Series Mulcher is specifically designed for tractors 30 to 70hp.
$0.00

Single Tine Rippers

The Cosmo single tine rippers are strong, versatile implements that are ideal for a range of applications; disturbing rabbit warrens, breaking up and aerating compacted ground, planting tree lines and land management. They are extremely effective on sloping ground where water runoff is an issue. By carefully ripping along the contours of the land you can catch rain water, increasing subsoil moisture for greener pastures long into the drier months. The tine has a chamfered (pointed) leading edge, that leaves a cleaner rip line, without tearing up huge chunks of grass, and reduces horsepower requirements. The tine is fully welded and reinforced with double clevis slip in pin linkage points, making them one of the strongest rippers on the market.
$0.00

UM Series Rotary Hoe

The European designed COSMO Bully UM Series Rotary Hoes are a single speed, side gear driven implement specifically for tractors in the 35 to 50hp range. Engineered to include multiple features and accessories traditionally found in much larger rotary hoes, the UM Series is suitable for use in nurseries, vineyards and orchards. The rotor features six (6) C shaped, heat treated blades (per flange) in a speed configuration. The speed configuration, a design where the blades are slightly staggered from flange to flange, reduces the horsepower required to produce a fine finish in a variety of soil conditions.
$0.00

Farmer

The Farmer series is Fieldmaster entry level post driver ideal for larger life style blocks, small beef and dairy farm operations. Fitted with a 180kg weight and main lift ram makes smaller fencing jobs a breeze. A wide range of optional extras also enable the ability to customise a machine to your needs. The minimum required hydraulic oil flow for this machine is 16ltrs per minute.
$0.00

SFM-H Series Mulcher

The European designed COSMO Bully SFM-H Series Mulchers come with a tower that hydraulically side shifts and a gearbox rating up to 70hp (max.). The rear of the deck has a series of height adjustable mulching rakes that hold large prunings (up to Ø 50mm) in the cutting chamber for maximum mulching, which along with the high speed rotor and hammer blades produce a high quality cut finish in vineyards, orchards and pastures.
$0.00

UH Series Rotary Hoe

The European designed COSMO Bully UH Series Rotary Hoes are single speed, gear driven implements specifically for tractors 50 to 75hp. Engineered to include many features and accessories traditionally found in much larger rotary hoes, the COSMO Bully UH Series is suitable for a range of horticultural and gardening applications including nurseries, vineyards and orchards. The rotor, with a diameter of 480mm blade to blade, features six (6) C shaped, heat treated blades (per flange) in a speed configuration. This design, where the blades are slightly staggered from flange to flange, reduces the tractor horsepower required to till a high volume of soil in a wide range of soil types and conditions.
$0.00