Close
Search

NZ's widest range of specialised vineyard/orchard mowers.

3 Tine Rippers

Three (3) Tine Rippers are engineered to fracture hard, compacted ground leaving it open and aerated. Land management is vital as hard, compacted ground is prone to standing water (puddles) that quickly evaporates in harsh climates. Equally, sloping ground has issues with water runoff. By opening up the ground you increase subsoil moisture and enable plants to grow deeper roots. The result is paddocks that take longer to dry out, keeping pastures greener for longer. In virgin ground these rippers can be used before a Rotary Hoe or Power Harrow; reducing horsepower requirements, minimising the load on the geared implement and decreasing the number of passes to prepare the soil. In secondary application, they can be used to break up the pan (compacted layer of soil geared implements create over time) increasing soil moisture and crop yields. The main frame is constructed from square tube, fully welded and reinforced. The linkage points are a double clevis slip in pin design. The three (3) height adjustable tines have a chamfered (pointed) leading edge, that leaves a cleaner rip line, without tearing up huge chunks of grass, and reduces horsepower requirements.
$0.00 incl tax

Fencer

Fieldmaster’s Fencer series of post drivers are New Zealand’s most popular post driver for beef and dairy farmers. An 8:1 rope-pulley configuration means the hammer falls faster allowing you to power through the job. The Tri-beam mast is 110% stronger than a standard UB section beam meaning you get longer life out of your farm equipment. Fitted with a 230kg hammer weight, top link, side tilt and main lift ram as standard. We also offer a huge range of options to fit rockspikes, augers, folding masts and hydraulic side shifts. The minimum required hydraulic oil flow for this machine is 16ltrs per minute.
$0.00 incl tax

FLS Series Mulcher

The Cosmo FLS Series mulchers are a light duty flail mower designed for compact and sub-compact tractors rated 15-35hp. A free wheel clutch has been incorporated into the gearbox. The gearbox produces a high rotor speed results in a finer finish on large areas of lawns, parklands or lifestyle block.
$0.00 incl tax

GML Series - 2-in-1 Mulcher / Mower

The Fieldmaster range of GML mowers is available in 9 widths and offers a huge range of modular options which ensures you receive a machine suitable for your specific vineyard or orchard conditions. Supplied standard as a mulching mower with front and rear rollers with our specially designed ‘triple-stack’ blades which provide a finely chopped mulch material. Synchronised blade overlap also allows for excellent turning circles and manoeuvrability in restricted areas and headlands. Suitable for tractors 30-100HP
$0.00 incl tax

GMS Series - Side Discharge Mower

The Fieldmaster range of GMS side discharge tractor mowers are available in 9 different widths. A huge range of modular options including wheels and rollers are available which ensures you receive a machine suitable for your specific vineyard or orchard conditions. Supplied standard as a side discharge mower with front stubbie rollers, rear roller and with our specially designed heavy duty axe blades which provide a significant hitting force obliterating pruning’s, trimmings and discharging the material out to the side of the mower and back under the rows. This provides an organic mulch and reduces the need for harmful sprays. Synchronised blade overlap also allows for excellent turning circles and manoeuvrability in restricted areas and headlands. Suitable for tractors 30-100HP.
$0.00 incl tax

MX Series Single Rotor Vineyard Mower

Fieldmaster’s range of MX series mowers are a specially designed single rotor gear driven narrow vineyard mower. Available in 4 cutting widths ranging in size from 0.9m to 1.8m wide enable the machine to fit down small vineyard rows. A heavy duty construction ensures the small machine is not comprised due to its size and is able to cope with the tough conditions. A range of options including rollers, mulching kits and side discharge skids can also be fitted to the MX series ensuring you are able to customise the machine to suit your needs. Suitable for tractors 40-100HP
$0.00 incl tax

UL Series Rotary Hoe

The European designed, COSMO Bully UL Series Rotary Hoes are gear driven implements for compact and sub-compact tractors up to 40hp (max.). Engineered to till soil in nurseries, vineyards, orchards and hobby farms, they are ideal for owner operators. The rotor features six (6) C shaped, heat treated blades (per flange) in a speed configuration. The speed configuration, a design where the blades are slightly staggered from flange to flange, reduces the horsepower required to produce a fine finish in a variety of soil conditions.
$0.00 incl tax

Forté

The Forte post driver series is a heavy duty piece of farm machinery designed for the New Zealand’s toughest conditions. A heavy duty offset base frame provides an extra low centre of gravity for stability and strength. A strong base also provides maximum hitting force ensuring max depth is reached easily. Oversize hydraulic cylinders ensure the mast is moved effortlessly and easily despite the substantial weight. The minimum required hydraulic oil flow for this machine is 16ltrs per minute.
$0.00 incl tax

GMR Series - Rear Discharge Orchard/Vineyard Mower

The Fieldmaster range of GMR mowers is available in 9 different widths. A huge rnge of modular options are available which ensures you receive a machine suitable for your specific vineyard or orchard conditions. Supplied standard as a rear discharge mower with front skidlets, rear roller and with our specially designed heavy duty axe blades which provide a significant hitting force obliterating prunings and trimmings. Synchronised blade overlap also allows for excellent turning circles and manoeuvrability in restricted areas and headlands. Suitable for tractors 30-100HP
$0.00 incl tax

SFM-M Series Mulchers

The European designed COSMO Bully SFM-M Series Mulchers have a fixed, bolt on tower with three (3) mounting positions. The rear of the deck has a series of height adjustable mulching rakes that hold large prunings (up to Ø 50mm) in the cutting chamber for maximum mulching. This results in a high quality cut finish in vineyards, orchards and pastures. The COSMO Bully SFM-M Series Mulcher is specifically designed for tractors 30 to 70hp.
$0.00 incl tax

Single Tine Rippers

The Cosmo single tine rippers are strong, versatile implements that are ideal for a range of applications; disturbing rabbit warrens, breaking up and aerating compacted ground, planting tree lines and land management. They are extremely effective on sloping ground where water runoff is an issue. By carefully ripping along the contours of the land you can catch rain water, increasing subsoil moisture for greener pastures long into the drier months. The tine has a chamfered (pointed) leading edge, that leaves a cleaner rip line, without tearing up huge chunks of grass, and reduces horsepower requirements. The tine is fully welded and reinforced with double clevis slip in pin linkage points, making them one of the strongest rippers on the market.
$0.00 incl tax

UM Series Rotary Hoe

The European designed COSMO Bully UM Series Rotary Hoes are a single speed, side gear driven implement specifically for tractors in the 35 to 50hp range. Engineered to include multiple features and accessories traditionally found in much larger rotary hoes, the UM Series is suitable for use in nurseries, vineyards and orchards. The rotor features six (6) C shaped, heat treated blades (per flange) in a speed configuration. The speed configuration, a design where the blades are slightly staggered from flange to flange, reduces the horsepower required to produce a fine finish in a variety of soil conditions.
$0.00 incl tax

Farmer

The Farmer series is Fieldmaster entry level post driver ideal for larger life style blocks, small beef and dairy farm operations. Fitted with a 180kg weight and main lift ram makes smaller fencing jobs a breeze. A wide range of optional extras also enable the ability to customise a machine to your needs. The minimum required hydraulic oil flow for this machine is 16ltrs per minute.
$0.00 incl tax

SFM-H Series Mulcher

The European designed COSMO Bully SFM-H Series Mulchers come with a tower that hydraulically side shifts and a gearbox rating up to 70hp (max.). The rear of the deck has a series of height adjustable mulching rakes that hold large prunings (up to Ø 50mm) in the cutting chamber for maximum mulching, which along with the high speed rotor and hammer blades produce a high quality cut finish in vineyards, orchards and pastures.
$0.00 incl tax

UH Series Rotary Hoe

The European designed COSMO Bully UH Series Rotary Hoes are single speed, gear driven implements specifically for tractors 50 to 75hp. Engineered to include many features and accessories traditionally found in much larger rotary hoes, the COSMO Bully UH Series is suitable for a range of horticultural and gardening applications including nurseries, vineyards and orchards. The rotor, with a diameter of 480mm blade to blade, features six (6) C shaped, heat treated blades (per flange) in a speed configuration. This design, where the blades are slightly staggered from flange to flange, reduces the tractor horsepower required to till a high volume of soil in a wide range of soil types and conditions.
$0.00 incl tax

BPF Series Mulcher

The European designed COSMO Bully BPF Series Mulchers are designed for tractors 60 to 100hp and have a tower that hydraulically side shifts. Like other COSMO Bully Mulchers, a series of height adjustable mulching rakes hold larger prunings (up to Ø 70mm) in the cutting chamber for mulching in vineyards and orchards. Additionally, the rear of the COSMO Bully BPF Series Mulcher deck can be opened to top pasture or when the operator needs to clear the chamber. This function is beneficial when cutting high volumes of material allowing it to be discharged efficiently, without sacrificing speed. Complete with a double skinned deck, side shift, a height adjustable rear roller and hammer blades, this mulcher will produce a high quality finish.
$0.00 incl tax

Hydrasideshift Bases

Fieldmaster offers a wide range of hydraulic side shift bases for post drivers. The range of varying sizes and compact designs enable these bases to be used on most post driver brands. The specially designed range of vineyard bases was a direct result of working with vineyards who required something different to what the market currently offered! There is also the option to enable 4-way side shift on these models meaning the unit is able to move both across the back of the tractor and towards and away from the cab. The minimum required hydraulic oil flow for this machine is 16ltrs per minute.
$0.00 incl tax

VH Series Rotary Hoe

The European designed COSMO Bully VH Series Rotary Hoes have a multi speed gearbox that is rated 50 to 90hp. The main frame is a robust and rigid construction with box section reinforcing and the side gears are sealed via a gasket creating an oil bath. The COSMO Bully VH Series produces a super fine finish. The spring loaded tailgate keeps soil inside and in contact with the blades until it is well pulverised. The multi speed gearbox allows the operator to customise the rotor speed. The rotor design, Ø 521mm from blade to blade, allows a large amount of soil to be worked without clogging up the chamber. The speed blade configuration, a design where six (6) L shaped blades (per flange) are slightly staggered, reduces the tractor horsepower required. The COSMO Bully VH Series can operate all day, every day, in demanding soil conditions and is suitable for a range of commercial horticultural and gardening applications including nurseries, vineyards and orchards.
$0.00 incl tax

UHH Series Rotary Hoe / **Indent Only**

The European designed COSMO Bully UHH Series Rotary Hoes are ideal for large scale domestic and commercial operations and working virgin ground. The multi speed gearbox (rated up to 140hp) is fixed to a robust and rigid main frame, constructed with box section reinforcing, so the implement can operate for prolonged periods of time in a range of soil types and conditions. The COSMO Bully UHH Series produces a super fine finish. The spring loaded tailgate keeps soil inside and in contact with the blades until it is well pulverised. The multi speed gearbox allows the operator to customise the rotor speed. The rotor design, Ø 530mm from blade to blade, allows a large amount of soil to be worked without clogging up the chamber. And the speed blade configuration, a design where six (6) L shaped blades (per flange) are slightly staggered, reduces the tractor horsepower required. The COSMO Bully UHH Series is suitable for a range of domestic and commercial horticultural and gardening applications including nurseries, vineyards and orchards.
$0.00 incl tax